SciELO Materials Research

Materials Research

Publicação de: ABM, ABC, ABPol

Área: Engenharias

Versão impressa ISSN: 1516-1439

Versão on-line ISSN: 1980-5373

Nossa Missão

Publicar trabalhos originais em pesquisas experimentais e teóricas, bem como simulações em processamento, estrutura e propriedades dos materiais.

Número mais recente

Materials Research, Volume: 28, Publicado: 2025

Artigos mais
recentes

Volume: 28 - Publicado em: 2025-06-09

Effect of cao and zno additions on density, electrical, and thermal properties of gd-doped ceria

Volume: 28 - Publicado em: 2025-06-09

Unveiling the potential of diatomaceous earth for the synthesis of sustainable geopolymer binders

Volume: 28 - Publicado em: 2025-06-06

Comparative study of the addition of tio2 and tio2/ommt clay on the properties of pbat for biodegradable food packaging applications

Volume: 28 - Publicado em: 2025-06-02

Development of porous refractory calcium hexaluminate (ca6) ceramic material from limestone waste

Volume: 28 - Publicado em: 2025-05-30

Study of recrystallization in metals through equiaxial growth of nuclei by computational simulation with three-dimensional hybrid cellular automata

Volume: 28 - Publicado em: 2025-05-26

Enhancing packaging materials: a microstructural investigation of graphene dispersion on polymer surfaces

Volume: 28 - Publicado em: 2025-05-30

Erosive wear and corrosion in hydrogenated and silicon dlc film deposited on carbon steel

Volume: 28 - Publicado em: 2025-05-23

Study the effect of copper chloride ii (cucl2) on optical properties of polyvinyl alcohol (pva)

Volume: 28 - Publicado em: 2025-05-19

Ctab influence on the hydrolytic stripping of nickel ferrite

Volume: 28 - Publicado em: 2025-05-19

Novel process method to prepare yttria stabilized zro2 beads based on the sol-gel titration technology

Volume: 28 - Publicado em: 2025-05-19

Influence of solution annealing temperature on crystallographic texture and grain disorientation of nb-enhanced maraging steel: an ebsd analysis

Volume: 28 - Publicado em: 2025-05-19

Study of the interaction between magnetic field and imposed potential on the corrosion of aa6060 aluminum wire

Volume: 28 - Publicado em: 2025-05-16

Effect of low solvent concentration on the rheological behavior of zirconia ceramic suspension and the mechanical properties of sintered parts

Volume: 28 - Publicado em: 2025-05-12

The impact of mn2+ ions concentration on co-electrowinning using a dimensionally stable anode (ti/ruo2): effects on physical and chemical properties

Volume: 28 - Publicado em: 2025-05-12

Analysis and multi-response optimization of friction stir welding parameters for stir-cast aa6092/b4c/ zro2 hybrid composites

Volume: 28 - Publicado em: 2025-05-12

Polyhydroxybutyrate/mica biocomposites: influence of filler content on the thermal and mechanical properties of phb

Volume: 28 - Publicado em: 2025-05-12

Impact of thermal power plant waste products on corrosion dynamics of pipeline carbon steel alloy in soil aqueous solutions

Volume: 28 - Publicado em: 2025-05-09

Mechanical properties of 3y-tzp woodpile scaffold made by extrusion 3d printing

Volume: 28 - Publicado em: 2025-05-02

Synthesis and application of sncl2.h2o/zno photoanodes

Volume: 28 - Publicado em: 2025-04-25

Effects of etching duration on surface properties and friction/wear characteristics of ceramic-coated silicone rubber for hydrogen compressors

Volume: 28 - Publicado em: 2025-04-25

Benefits of re-sintering on the properties of al2o3-based ceramics obtained by extrusion 3d printing

Volume: 28 - Publicado em: 2025-04-25

Development and evaluation of magnetic bone cements based on hap-fe3o4 and hap-cofe2o4 for biomedical applications

Volume: 28 - Publicado em: 2025-04-18

Enhanced wear resistance and microstructure of hypoeutectoid fe-cr-c-nb alloys via submerged arc surfacing

Volume: 28 - Publicado em: 2025-04-18

Anti-corrosion and mechanical performance of graphene oxide and reduced graphene oxide multi-layer coatings applied to nickel-titanium via dip-coating

Volume: 28 - Publicado em: 2025-04-14

Silica gel functionalized with cu, ag and zno as an absorbent system in active packaging

Volume: 28 - Publicado em: 2025-04-07

Effects of adding silver oxide nanoparticles to anodized titanium surfaces

Volume: 28 - Publicado em: 2025-04-07

Densification and resistance of ta2o5 and zno co-doped sno2 ceramic targets for low-cost tco films of solar cells

Volume: 28 - Publicado em: 2025-04-07

Torsional fatigue of ti15mo titanium alloy

Volume: 28 - Publicado em: 2025-04-07

Fabrication, characterization and cell adhesion of a cu-doped microarc oxidation film on a titanium surface

Volume: 28 - Publicado em: 2025-03-24

Influence of post-weld heat treatment on the mechanical properties and microstructure of a seamless pipe of an astm a335 gr p91 steel

Volume: 28 - Publicado em: 2025-03-24

Microstructural characterization, cytotoxicity and antibacterial evaluation of multicomponent monbnitizr alloy

Volume: 28 - Publicado em: 2025-05-02

Preparation and assessment of novel chitosan/bioactive glass composite foams for exudate management in wound dressing applications

Volume: 28 - Publicado em: 2025-03-21

Reveling the structural, electric, and high-frequency dielectric properties of residue doped-cawo4 flexible multilayer ceramic sheets

Volume: 28 - Publicado em: 2025-03-21

Active metal soldering and characterization of soldered joints in cu base plate to aluminum-graphite composites

Volume: 28 - Publicado em: 2025-03-14

Uncertainty quantification in masses of alloy components and atomic radii modification in high-entropy alloys design: thermophysical parameters calculation approach

Volume: 28 - Publicado em: 2025-03-10

Numerical modeling and optimization of mechanical properties in porous aluminum matrix composites reinforced with sic particles

Volume: 28 - Publicado em: 2025-03-03

Kinetics, thermodynamics and structure: an analysis of corn starch acetylation

Volume: 28 - Publicado em: 2025-03-03

Evaluation of limonene-based compound as volatile inhibitor to protect aisi 1020 carbon steel against corrosion

Volume: 28 - Publicado em: 2025-02-28

Preparation of negative poisson's ratio 316l stainless steel porous bone scaffolds based on finite element analysis and 3d printing technology

Volume: 28 - Publicado em: 2025-02-28

Effect of calcium addition timing to liquid steel on inclusion modification of steel heavy plates

Volume: 28 - Publicado em: 2025-02-28

Water plasma treatment method: simultaneous sterilization and surface modification of titanium-based implants

Volume: 28 - Publicado em: 2025-02-28

Development of empirical relationships for prediction of wear properties of aa6092/b4c aluminum matrix composites produced using friction stir welding

Volume: 28 - Publicado em: 2025-02-24

Synthesis and microstructural characterization of lanthanum doped cerium oxide by solution combustion synthesis

Volume: 28 - Publicado em: 2025-02-24

Influence of heat treated manihot esculenta biosilica on friction stir welded aa 6065-al2o3 metal matrix composite and microstructural, mechanical, and fatigue analysis

Volume: 28 - Publicado em: 2025-02-24

Microstructure and properties of silicon carbide and yttrium oxide reinforced copper matrix hybrid composites (cu-sic-y2o3)

Volume: 28 - Publicado em: 2025-02-17

Processing and characterization of a novel zta-mgo for dental applications

Volume: 28 - Publicado em: 2025-02-17

Study of the efficacy of zinc oxalate conversion coating in protecting structures containing galvanized steel in corrosive environments with ph variation

Volume: 28 - Publicado em: 2025-02-17

Microstructural evolution of uns s32205 duplex stainless steel during cold rolling and subsequent annealing

Volume: 28 - Publicado em: 2025-02-14

Sustainable ceramic membranes from clays and mining wastes by rapid sintering process

Volume: 28 - Publicado em: 2025-01-27

Comparison of multiparameter selection processes for potential application of titanium alloys in coronary stents

Volume: 28 - Publicado em: 2025-01-13

Silica deposition on polyamide 6,6 fabrics by hybrid corona-dielectric barrier discharge plasma

Notícias

2025-06-06 14:15

Produção científica indígena: línguas originárias e auto identificação étnica nos Repositórios Institucionais

A UFSCar implementa iniciativa inovadora ao incluir o campo de...

2025-05-07 10:00

Integridade científica e agência humana na pesquisa entremeada por IA Generativa

A comunicação científica está passando por uma reconfiguração que,...

2025-04-30 11:00

Chatbots de IA e a simulação do diálogo: o que a teoria bakhtiniana tem a dizer?

Propõe-se um modelo para análise discursiva das interações com...

2025-04-23 11:30

Métricas internacionais invisibilizam periódicos urbanos da América Latina

Estudo mostra como critérios globais de avaliação científica...

2025-03-26 14:00

Ciência global em perigo

O atual governo estadunidense está restringindo a ciência de...

2025-02-05 15:00

Pesquisadores brasileiros lançam diretrizes para o uso ético e responsável da Inteligência Artificial Generativa (IAG)

Pesquisadores brasileiros lançam as Diretrizes para o uso ético e...

2025-01-15 12:00

A Ciência Aberta ainda é tema incipiente nos periódicos de Administração

Apesar de valoroso, o movimento da Ciência Aberta ainda é extrema...

2024-12-20 11:00

Por onde começar com a IA no gerenciamento de pesquisas [Publicado originalmente no LSE Impact Blog em dezembro/2024]

A IA generativa está tendo um efeito transformador no trabalho...

2024-11-14 13:45

Acessibilidade no Programa SciELO: estado atual e perspectivas futuras – Parte 2

O Grupo de Trabalho Interdisciplinar SciELO Acessibilidade, tem...

2024-11-08 13:00

Acessibilidade no Programa SciELO: estado atual e perspectivas futuras – Parte 1

O Grupo de Trabalho Interdisciplinar SciELO Acessibilidade, tem...

Materials Research

Nossa Missão

Artigos mais recentes

Notícias

Nossa Missão

Artigos mais recentes

Notícias

Artigos mais
recentes